Umidigi A11S spare parts

    There are 7 products.

    Technical Characteristics of Umidigi A11S Repuestos

    The Umidigi A11S Repuestos are replacement parts specifically designed for the Umidigi A11S smartphone. They ensure the optimal performance of your device, from the touch screen to the battery.

    Screen

    The Umidigi A11S Repuestos come with a 6.53" HD+ Incell LCD display that provides a crisp...

    Technical Characteristics of Umidigi A11S Repuestos

    The Umidigi A11S Repuestos are replacement parts specifically designed for the Umidigi A11S smartphone. They ensure the optimal performance of your device, from the touch screen to the battery.

    Screen

    The Umidigi A11S Repuestos come with a 6.53" HD+ Incell LCD display that provides a crisp and vibrant image output.

    Battery

    The battery replacement available is a 5150mAh powerhouse which ensures an extended power backup.

    Camera

    The camera replacements include a 16MP main camera and an 8MP selfie camera.

    Miscellaneous

    Other repuestos include a power button, volume controller, charging port and more.

    Instructions for Replacing Umidigi A11S Repuestos

    Tools Required

    • Set of Screwdrivers
    • Pry tool
    • Tweezers
    • Heating pad or hair dryer

    Preparation Tips

    Before you begin, ensure you have all required tools. Use a heating pad or hair dryer to open the adhesive parts to avoid breaking them.

    Step by step instruction for Repuestos Replacement

    Disclaimer:Proceed with caution. Any damage caused to your device during the replacement process is not covered under warranty.

    • Step 1:Switch off the device

    • Step 2:Use a suitable screwdriver to remove the screws at the back of your device

    • Step 3:Using a pry tool, carefully remove the back panel

    • Step 4:Gently remove the battery connector. Use a pry tool to eventually remove the battery

    • Step 5:To replace other parts, remove the necessary screws and cables. Replace the part with the new one.

    • Step 6:After replacing the components, connect the cables, fix the screws, reinsert the battery, and put the back cover.

    • Step 7:Switch on the device to check if the replacement was successful.

    Less
    More
    Showing 1 - 7 of 7 items