Umidigi Bison 2 spare parts

Umidigi Bison 2 Technical Characteristics

The Umidigi Bison 2 is a rugged smartphone built to withstand tough conditions and usage. Here are the technical specifications:

• OS: Android 11
• Display: 6.3" FHD+
• Processor: MediaTek Helio G80
• RAM: 8GB
• Internal Storage: 128GB expandable up to 256GB
• Battery: 5000mAh
• Camera: 48MP main sensor, 16MP selfie camera
• Ports: Type-C USB port, 3.5mm headphone jack

Replacing Umidigi Bison 2 Repuestos

Replacing parts on the Umidigi Bison 2 entails a meticulous process requiring proper tools and handling.

Tools Needed

• Screwdriver set
• Plastic pry tools
• Tweezers
• Suction cup

Steps

Follow the steps below with caution:

1. Turn off your device.

2. Remove any protective casing or attachments.

3. Loosen the screws at the corners of the device using the screwdriver.

4. Use the suction cup and plastic pry tools to carefully open the back cover.

5. Locate the part to be replaced.

   • Lots of components are attached to the motherboard. Handle them with utmost care to avoid any kind of damage.

6. Once found, gently disconnect it from the motherboard using the tweezers.

7. Replace with the new one.

Reassembly of the device follows in the reverse order.

Please note, the above steps could vary depending on the specific component you are replacing.