Umidigi Bison GT2 Pro spare parts

Technical Characteristics of Umidigi Bison GT2 Pro Repuestos

The Umidigi Bison GT2 Pro Repuestos (parts) carry some excellent specifications for those who aim to carry out repairs or replacements. This includes everything from the battery to the screen, the camera, and more:

• Screen: 6.3-inch Full HD+ display. Made of resistance-tested Gorilla Glass.
• Processor: MediaTek Helio G95, providing solid performance ability.
• RAM: Up to 8GB, providing excellent multitasking and speed capabilities.
• Internal Storage: Up to 128GB, perfect for storing apps, photos, and media.
• Battery: 5150mAh Li-Po, providing long-lasting phone use.
• Camera: 48MP quad rear camera and 24MP front camera, providing stunning photo capture ability.
• Topology: Rugged design, resistant to water, dust, and shocks.

Instructions for Replacing Umidigi Bison GT2 Pro Repuestos

Please note that these repairs should only be attempted by a skilled technician. Improper repairs risk causing permanent damage to the device.

Screen Replacement

• Remove Sim Tray: Firstly, remove the SIM card tray from the side of the device.
• Heat the edges: Soften the adhesive that holds the screen by heating the edges of the device. Use a heat gun or hairdryer cautiously for this step.
• Remove the Screen: Using a thin plastic tool, gently lift the screen, starting from the corners. Be careful not to cause any damage.
• Install New Screen: Before installing the new screen, make sure to clean the adhesive remnants from the frame. After that, place the new adhesive, align the new screen onto the frame, and gently press until the adhesive sticks.

Battery Replacement

• Remove the Back Cover: Start by removing the back cover. Use a plastic tool to gently pry it loose.
• Disconnect Battery: The battery connector is usually found at the top of the battery. Disconnect it using a plastic pry tool.
• Replacing the Battery: After successfully disconnecting the battery, carefully remove it. Do not bend or puncture the battery. Place the new battery contiguously in the empty space and reconnect it.

Repeat these steps in reverse to put the phone back together. Always be extremely careful when handling small connectors and sensitive parts.