Umidigi Bison Pro spare parts

Technical Characteristics of Umidigi Bison Pro Repuestos

The following are the key technical characteristics of Umidigi Bison Pro repuestos:

• Screen: 6.3 inch, Full HD+ resolution of 2340 x 1080 pixels.
• Processor: MediaTek Helio G80 Octa-core processor.
• RAM: Up to 8GB.
• Storage: Up to 128GB, expandable via MicroSD.
• Battery: 5000mAh, supports 18W fast charging.
• Camera: Rear - 48MP (main), 16MP (ultra-wide), 5MP (depth sensor). Front - 24MP
• Operating System: Android 11

Instructions to Replace Umidigi Bison Pro Repuestos

Tools Needed

The following tools are needed for replacement:

• Small Phillips screwdriver
• Plastic opening tools (spudgers)
• Tweezers
• Heat gun or iOpener

Steps for Replacement

Please follow the instructions below to replace the parts of the Umidigi Bison Pro:

1. Turn off your Umidigi Bison Pro and remove the SIM card tray.
2. Use the iOpener or heat gun to warm the edges of the back cover. This will help to loosen the adhesive.
3. Use a plastic opening tool to gently pry up the back cover.
4. Remove the screws securing the battery connector and disconnect the battery.
5. Remove the screws securing the component you wish to replace (e.g., screen, camera).
6. Disconnect the connectors of the component and remove it from the phone.
7. Place the new component in the proper place and reconnect the connectors.
8. Re-screw the screws that were taken out earlier.
9. Reconnect the battery and screw in the battery connector screws.
10. Attach the back cover and reapply heat to re-adhere the adhesive.
11. Insert the SIM card tray.

Note: If you are not comfortable doing the replacement yourself, please visit a professional repair technician.