Vivo V11 spare parts

    There are 10 products.

    Vivo V11 Repuestos Technical Characteristics

    The Vivo V11 repuestos, or spare parts, feature high-quality components that ensure your Vivo V11 smartphone operates to its full capacity. Here are some of the key technical characteristics:

    • Screen: 6.41-inch Super AMOLED with resolution 1080 x 2340 pixels
    • Battery: Non-removable Li-Po 3400 mAh bat...

    Vivo V11 Repuestos Technical Characteristics

    The Vivo V11 repuestos, or spare parts, feature high-quality components that ensure your Vivo V11 smartphone operates to its full capacity. Here are some of the key technical characteristics:

    • Screen: 6.41-inch Super AMOLED with resolution 1080 x 2340 pixels
    • Battery: Non-removable Li-Po 3400 mAh battery
    • Camera: 12 MP dual pixel PDAF - 5 MP depth sensor
    • Sensors: Fingerprint (under display), accelerometer, proximity, compass

    Replacement Instructions for Vivo V11 Repuestos

    Tools Needed

    You will need a screwdriver, a plastic opening tool, tweezers, a spudger, and a suction handle.

    Battery Replacement

    Here's how you can replace Vivo V11 battery:

    • Step 1: Turn off your Vivo V11 and remove the SIM card tray.
    • Step 2: With your plastic opening tool, pry open the back cover from the bottom of the phone.
    • Step 3: Unscrew the screws holding the battery connector covering plate and remove it with the tweezers.
    • Step 4: Unplug the battery connector and use the spudger to gently pry the battery out of its holder.
    • Step 5: Place your new battery into the holder and reverse the steps to reassemble your phone.

    Screen Replacement

    Here's how you can replace Vivo V11 Screen:

    • Step 1: Turn off your Vivo V11 and remove the SIM card tray.
    • Step 2: Use a heat gun or hair dryer on the edges of the screen to soften the adhesive.
    • Step 3: Attach the suction handle to the screen and gently lift it enough to insert your plastic opening tool.
    • Step 4: Slowly work your way around the edges, making sure not to insert the tool too far to avoid damaging interior components.
    • Step 5: Once the adhesive is loosened, carefully lift the screen away from the phone.
    • Step 6: Replace it with the new screen using adhesive to secure it and reverse the steps to reassemble your phone.
    Note: Use caution during this process to avoid causing further damage to your device. Less
    More
    Showing 1 - 10 of 10 items