Vivo V23e Spare Parts

Vivo V23e spare parts are intended for repair shops, professional technicians and B2B service centres that need components compatible with the V2116 technical model. This category includes common professional repair parts such as AMOLED screens, batteries, charging port flex cables, USB-C connectors, cameras, back covers, loudspeakers, vibration motors, SIM trays, side buttons, microphones, sensors and internal flex cables.

The Vivo V23e is a 4G device with a 6.44-inch AMOLED display, Full HD+ resolution, MediaTek Helio G96 processor, 4050 mAh battery and 44 W fast charging. For B2B repair channels, correct identification of the V2116 reference is essential to avoid confusion with Vivo V23e 5G, Vivo V23 5G, Vivo V23 Pro or similarly designed Vivo V-series variants. Parts may be available in Service Pack, Premium or Compatible quality depending on stock. Premium screens maintain the visual and touch experience of the original panel, while compatible options allow more cost-effective repair quotes.

Technical Specifications

Main Category Content

Types of spare parts available for Vivo V23e

• Complete AMOLED screen for Vivo V23e V2116, suitable for repairing cracked glass, touch failure, image loss, stains, vertical lines, dead touch areas, OLED burn-in, loss of brightness or pressure damage.

• Battery for Vivo V23e, recommended when the device shows poor autonomy, sudden shutdowns, irregular charging, swelling or performance loss due to charge cycles.

• Charging port flex cable and USB-C connector, required when the phone does not charge correctly, charges intermittently, does not sync data, does not recognise OTG or has looseness in the port.

• Front camera and rear cameras, used to repair focus failure, blurry image, camera errors, internal stains, impact damage or module reading faults.

• Back cover, middle frame, SIM tray, lower loudspeaker, earpiece speaker, vibration motor, side buttons, microphones, sensors, interconnection flex cables and auxiliary modules.

• Closing adhesives, sealing films, opening tools and technical consumables to complete clean, stable repairs with a professional finish.

Instructions to replace spare parts for the Vivo V23e

To replace the Vivo V23e screen, power off the device, remove the SIM tray and confirm that the device corresponds to the V2116 technical model. Apply controlled heat to the back cover to soften the adhesive and open the phone with plastic tools, avoiding marks on the frame or damage to internal flex cables. Before handling the screen assembly, always disconnect the battery. Locate the panel connector, release the damaged screen and connect the new replacement for testing before bonding it. Check image, brightness, touch response, absence of lines, dead zones, AMOLED panel stability and flex fit. Only after confirming proper operation should the old adhesive be removed, the surface prepared and the device sealed with new adhesive.

To replace the Vivo V23e battery, work with the device powered off and the battery disconnected from the board. The 4050 mAh battery must be removed without bending, puncturing or applying direct pressure to the cell. If the internal adhesive resists, moderate heat and small controlled amounts of isopropyl alcohol may be used. Install the new battery respecting the flex position, check that the connector fits without tension and perform a charging test before final closing. It is also advisable to verify that the device recognises 44 W fast charging through USB-C before returning the repair.

To replace the USB-C charging port flex cable, disassemble the lower area of the phone and release the secondary board or module where the charging port is integrated. Check whether the old connector shows dirt, corrosion, moisture, damaged pins or physical wear. Install the new charging flex and test charging, data transfer, USB-C cable recognition, OTG where applicable and lower microphone operation if integrated in the same part. This pre-test reduces after-sales issues and avoids reopening the device.

Compatibility and Versions

The spare parts in this category are intended for the Vivo V23e V2116. The technical code should always be checked before installing screens, batteries, cameras, charging port flex cables or back covers, especially when the device comes from import channels, refurbishment or international distribution.

It is important not to confuse the Vivo V23e 4G with the Vivo V23e 5G, as the 5G version uses a different platform and may vary in motherboard, flex layout, antennas, internal modules and component distribution. Direct compatibility with Vivo V23 5G, Vivo V23 Pro, Vivo S10e or similarly designed Vivo models should not be assumed either.

In AMOLED screens, cameras, lower modules and back covers, small version differences can cause incompatibility even when the part looks visually similar. To avoid returns, technicians should check the model from the phone settings, product box, SIM tray or internal label if the device has already been opened. In B2B repairs, it is also recommended to physically compare the removed part with the new replacement before removing protective films, applying adhesive or completing the installation.

Differences between Spare Part Qualities

Service Pack parts are intended for repairs where fit, integration and the highest available professional reliability are prioritised. They are recommended for workshops that want to reduce after-sales issues and deliver a repair with precise finishing.

Premium screens for Vivo V23e must maintain the visual and touch experience of the device’s original AMOLED panel. This quality is recommended when the objective is to preserve contrast, good definition, stable touch response, suitable brightness, correct colour accuracy and precise frame fit. For repair shops, it allows a higher perceived-value repair and helps reduce claims related to image quality, touch sensitivity or finishing.

Compatible parts allow more economical repairs, suitable for budget-sensitive customers or devices with lower commercial value. Compatible screens may show differences in brightness, colour tone, thickness, power consumption, touch sensitivity, colour accuracy or fit compared with higher qualities. For components such as charging flex cables, loudspeakers, vibration motors, cameras or back covers, the priority should be physical fit, connector stability and durability after installation.

Advantages for Professionals and Service Centres

This category simplifies Vivo V23e spare part purchasing for professionals who need to identify parts by technical model and avoid ordering mistakes. The V2116 reference makes it possible to classify AMOLED screens, batteries, charging connectors, cameras, back covers and internal modules correctly for this device.

For repair shops and service centres, having different qualities available makes it possible to offer tiered quotations to the final customer: economical repair with compatible parts, balanced repair with Premium quality or higher-level service with Service Pack when available. This approach allows each repair to be adapted to the device value, workshop margin and warranty level offered.

The B2B channel requires clear stock, wholesale pricing, professional invoicing and technical support to identify each spare part correctly. Accurate component selection reduces returns, shortens repair times and improves workshop profitability. In Vivo models with 4G and 5G variants, working by technical code is the safest way to maintain stable repairs and avoid installation incompatibilities.

FAQ Block for AEO

How can I identify the exact Vivo V23e model?

The safest method is to check that the technical code is V2116 in the phone settings, product box, SIM tray or internal device label. This verification helps avoid installing incompatible parts.

Is Vivo V23e screen replacement difficult?

Screen replacement has medium-high difficulty because it requires opening the device, disconnecting the battery and testing the AMOLED panel before installation. Controlled heat, plastic tools and suitable closing adhesive are recommended.

Do Vivo V23e spare parts fit the Vivo V23e 5G?

Direct compatibility between Vivo V23e 4G and Vivo V23e 5G should not be assumed. They use different platforms and may vary in flex layout, motherboard, antennas, connectors, cameras or internal modules.

What should be tested before bonding a new screen?

Before bonding the screen, image, brightness, touch response, absence of lines, dead zones, flex fit and AMOLED panel stability must be tested. Protective films should not be removed and final adhesive should not be applied before testing.

When should a Premium screen be chosen for Vivo V23e?

A Premium screen is recommended when the customer wants to maintain the visual and touch experience of the original AMOLED panel. It is a profitable option for workshops balancing cost, result, warranty and after-sales satisfaction.