Vivo X5 Max spare parts
There are 2 products.Vivo X5 Max Repuestos Technical Specifications
The Vivo X5 Max features several key technical components that can be replaced in case of damage or wear. These components and their technical characteristics are detailed below:
- Screen: Size - 5.5", Resolution - 1920 x 1080 pixels, Technology - Super AMOLED
- Processor: Model - Qualcomm Snapdrag...
Vivo X5 Max Repuestos Technical Specifications
The Vivo X5 Max features several key technical components that can be replaced in case of damage or wear. These components and their technical characteristics are detailed below:
- Screen: Size - 5.5", Resolution - 1920 x 1080 pixels, Technology - Super AMOLED
- Processor: Model - Qualcomm Snapdragon 615, Cores - 8, Clock Speed - 1.5 GHz
- Battery: Capacity - 2000 mAh, Type - Non-Removable Li-Po
- Camera: 13 MP Primary/5 MP Front-facing
Instructions for replacing Vivo X5 Max Repuestos
Disclaimer
Please note that these instructions are given for information purpose only. Attempting to replace Vivo X5 Max components on your own might void the warranty and cause permanent damage to the device if not performed properly.
Screen Replacement
The Screen is one of the key replaceable components. Below are the detailed steps on how to replace the screen:
- Step 1: Power off the device and remove the SIM card tray.
- Step 2: Use a heat gun to loosen the adhesive holding the screen to the frame.
- Step 3: Carefully lift the old screen using a plastic pry tool.
- Step 4: Replace the old screen with the new one and firmly press it into place. Ensure that all the connections are secure before reassembling the device.
Battery Replacement
For battery replacement, follow these steps:
- Step 1: After shutting down the device, use a screwdriver to undo the screws holding the back case.
- Step 2: Gently remove the back case and disconnect the battery connector using a plastic pry tool.
- Step 3: Replace the old battery with the new one, ensuring it seats perfectly. Connect the battery connector and reassemble the device.
Camera Replacement
To replace the camera module, follow these steps:
- Step 1: Begin by powering off the device and removing the back cover.
- Step 2: Locate the camera connector and carefully disconnect it.
- Step 3: Take the new camera module, connect it and firmly press it into place. Ensure all connections are secure before reassembling the device.
Less More
Available
Available