Vivo X51 5G spare parts

Vivo X51 5G Repuestos Technical Characteristics

The Vivo X51 5G replacement parts, or repuestos, consist of various technical components that can be replaced individually, giving the device a longer lifespan or repairing any possible defects. Below are the main technical characteristics:

• Display: FHD+ (2376x1080) AMOLED, 6.56 inch display.
• Battery: 4315mAh, rechargeable lithium-ion Battery.
• Main Camera: 48-megapixel main camera sensor.
• Front Camera: 32-megapixel front camera.
• Motherboard: Qualcomm Snapdragon 765G.
• RAM: 8GB LPDDR4x.
• Storage: 128GB/256GB UFS 2.1.
• Operating System: Funtouch OS 10 (Based on Android 10).

Instructions for replacing Vivo X51 5G Repuestos

Below are some general instructions for replacing components on the Vivo X51 5G. Always ensure you have the correct replacement parts before attempting any repairs, and if you are not confident, seek professional assistance.

Preparation:

• Make sure to turn off the device before starting the repair.
• Create a clean and bright workspace to keep track of small screws and parts.
• Arrange the necessary tools - such as a small Phillips screwdriver and plastic pry tools.

Back Cover and Battery Replacement:

• Use a heat gun or hair dryer to lightly warm up the edges of the back cover. This loosens the adhesive.
• Gently pry open the back cover using plastic pry tools, starting from one edge.
• The battery connector can be located and disconnected from the motherboard. Remove any screws securing the battery.
• After that, you can gently pry out the battery - again, be aware of any strong adhesive.
• Replace with the new battery, securely fastening it in the device and reconnecting the battery connector.
• Attach the back cover, pressing it firmly into place.

Screen Replacement:

• Start by removing the back cover following the steps above.
• Disconnect any connectors associated with the screen from the motherboard.
• Remove any screws holding the screen assembly to the frame.
• Heat the front edges of the screen to loosen the adhesive.
• Use a plastic pry tool to gently remove the screen from the frame.
• Attach the new screen to the frame, connecting any necessary connectors please ensure it's properly aligned.
• Reattach the back cover.

Note: Remember to handle all components with care to avoid further damage.