Wiko Robby 2 spare parts

Technical Characteristics of Wiko Robby 2 Repuestos

The Wiko Robby 2 is smartphone designed with functionality and affordability in mind. Its components can be replaced easily and the technical characteristics of its key components are as follows:

• Screen: 5.5’’ widescreen format, IPS technology, 1280 x 720 pixels display resolution
• Battery: 2500mAh battery, with an estimated talk time up to 15 hours
• Processor: Quad-Core 1.3 GHz, Cortex-A7
• Memory: 2GB RAM with an expandable storage of up to 32GB
• Camera: 8MP rear camera and 5MP front camera.

Instructions to Replace Wiko Robby 2 Repuestos

Before you begin, ensure that you have the necessary tools for smartphone repair, such as a screwdriver, spudger, tweezers, pry tools, and replacement parts.

Replacing the Screen

Follow the steps below to replace the screen:

• Power off the device and remove the SIM card tray.
• Remove the back cover using a pry tool.
• Unscrew the screws securing the battery holder and remove the battery.
• Remove the screws securing the motherboard and carefully lift it out.
• Disconnect the display connector and replace the screen.
• Reassemble the phone by following the disassembly steps in reverse order.

Replacing the Battery

Follow the steps below to replace the battery:

• Power off the device and remove the SIM card tray.
• Remove the back cover using a pry tool.
• Unscrew the screws securing the battery cover and lift the cover.
• Gently lift out the old battery and replace it with the new one.
• Replace the battery cover and screw it in place.
• Reattach the back cover and power on the device to test the new battery.

Remember to dispose of your old parts responsibly and consult a professional if you experience any difficulties.