Wiko Sunny 2 spare parts

Technical Characteristics of Wiko Sunny 2 Repuestos

The Wiko Sunny 2 smartphone is an affordable device packed with essential features.

• Screen Size: 4 inches, resolution of 480 x 800 pixels.
• Processor: Quad-core processor, MediaTek MT6580M chipset.
• Memory: 8GB Internal Storage, 512MB RAM, expandable up to 32GB with microSD.
• Battery: 1300mAh Li-Ion removable battery.
• Camera: 5 MP rear, VGA front camera.

Wiko Sunny 2 Repuestos Replacement Guide

Follow these steps to replace your Wiko Sunny 2 parts. Please proceed with caution as improper handling can cause further damage.

Tools Needed:

• Small Phillips Screwdriver
• Plastic Opening Tools
• Spudger
• Electrostatic Discharge Safe Tweezers

Instructions:

Step 1: Battery Replacement

Begin by turning off your device. Afterwards, remove the back cover using the designated slot on the bottom right corner, then lift the battery from its cavity.

Step 2: Screen Replacement

First remove the six screws located around the back of the phone. Now use the plastic opening tool to unclip the plastic holding the screen. You should replace it with the new screen and reassemble the phone in reverse order.

Step 3: Processor and Camera Replacement

These parts are located on the motherboard. To access it, you need to remove all screws on the back after battery and screen removal. Lift the motherboard and replace the necessary part. Reassemble the phone in reverse order.

Note: These steps require care and technical know-how. If you are not comfortable doing this, seek professional help.