Wiko Sunny 3 Mini spare parts

Wiko Sunny 3 Mini Repuestos Technical Specifications

The Wiko Sunny 3 Mini is a compact and reliable device with well-built repuestos (parts). It's crucial to know the technical specifications of these parts for efficient replacement and repair. Please see the specifications below:

• Screen: 4-inch WVGA Display, 480 x 800 pixels resolution
• Processor: Quad-core 1.3 GHz, Cortex-A7
• Memory: 512MB RAM | 8GB Storage, MicroSD up to 32 GB
• Operating System: Android 8.1 Oreo (Go edition)
• Battery: 1400 mAh Li-Ion Battery
• Camera: Rear: 5MP, Front: 2MP

Instructions for Replacing Wiko Sunny 3 Mini Repuestos

Preparations

Before you start the replacement process, ensure your working surface is clean and free of static. Gather the necessary tools: a cell phone repair kit which includes a small Phillips-head screwdriver, a suction cup, a spudger, and a pry tool. Do remember to turn off your Wiko Sunny 3 Mini before starting.

Step 1: Removing the Back Cover

Apply the suction cup to the back of the phone, press down and pull up to remove the back cover. If the cover doesn’t come off easily, you can use the plastic pry tool to gently nudge it loose.

Step 2: Removing the Battery

Locate the battery and gently lift it out of its compartment with the plastic pry tool.

Step 3: Removing the Screen

Use the Phillips screwdriver to unscrew the screws securing the screen. Once that's done, you can use the pry tool to lift the screen.

Step 4: Replacing the Relevant Part

Whichever repuesto requires replacement, whether it's the camera, screen, or battery, locate it and gently lift it out. Replace it with the new part, ensuring it fits snugly and connects properly to the phone's hardware.

Step 5: Reassembly

Once the new part has been installed, reassemble your phone by reversing the steps above. Make sure each part fits as it originally did, and that all screws are tightened. After reassembly, turn on your phone and check the newly installed repuesto for proper operation.

Note: Always work gently when handling components, to avoid damaging parts or connectors.