Wiko View 2 Pro spare parts

Technical Characteristics of Wiko View 2 Pro Repuestos

The Wiko View 2 Pro Repuestos encompass a variety of individual parts and components that function together as integral parts of the Wiko View 2 Pro smartphone. Below are some of these major components:

• Display: The Wiko View 2 Pro features a 6.0 inches, 92.9 cm2 (~76.7% screen-to-body ratio) IPS LCD, which is easy to replace when damaged.
• Battery: Comes with a Non-removable Li-Po 3000 mAh battery. Consult a professional for battery replacements.
• Camera: The phone boasts a 16 MP, PDAF main camera and a 16 MP selfie camera. Camera modules can be replaced individually.
• Motherboard: The motherboard is the brain of the device and all round components depend on it. Ensure to handle the motherboard with utmost care.

Instruction for Replacing Wiko View 2 Pro Repuestos

Tools Required

Before starting the repair process, ensure you have the following tools: Plastic opening tools, Precision tweezers, Small Phillips screwdriver, Spudger, Suction handle, Heat gun or similar.

Steps to replace the screen:

• Step 1: Power off the Wiko View 2 Pro smartphone and remove the SIM card tray.
• Step 2: Use a heat gun to soften the adhesive holding the back cover. Apply the suction cup to the back cover and pull it with force until it opens a small gap.
• Step 3: Insert a plastic spudger into the gap to open the phone. Move it along the edges to release all the clips holding the back cover.
• Step 4: Unscrew all the Phillips screws securing the motherboard frame and lift it gently using the spudger.
• Step 5: Disconnect and remove the battery. Then disconnect the display connector.
• Step 6: Replace with the new display and reverse the steps to reassemble the phone.

Note:

Other part replacements may require a professional repair due to the high level of technicality involved.