Wiko View 3 Lite spare parts

Technical Characteristics of Wiko View 3 Lite Repuestos

The Wiko View 3 Lite smartphone is a robust, budget-friendly device boasting a series of impressive technical characteristics and repuestos (replacement parts). The detailed specifications and features of this device can significantly assist in handling repairs and replacements with the utmost precision.

General Specifications

• Brand: Wiko
• Model: View 3 Lite
• Screen Size: 6.09 inches
• Resolution: 600 x 1280 pixels

Replacement Parts

• Screen Assembly: The screen assembly includes LCD display and touchscreen
• Battery: The battery of Wiko View 3 Lite is a Li-Po 4000 mAh battery
• Camera: It comes with Dual 13 MP + 2 MP camera on the rear and 5 MP on the front

Instructions to Replace Wiko View 3 Lite Repuestos

The following instructions detail the process for replacing parts on a Wiko View 3 Lite smartphone. Please ensure that you have all the necessary tools and replacement parts before you start. Screen replacement will be used as an example.

Step 1: Turn Off the Device

For safety purposes, power off the Wiko View 3 Lite and unplug any connected cables.

Step 2: Remove the Screen Assembly

Use a professional tool carefully to pry up the screen. Gently warm the edges with a heat gun to loosen the adhesive.

Step 3: Disconnect the Screen Assembly

Remove the old screen assembly by disconnecting it from the motherboard. Be careful not to pull as the ribbon cable could get damaged.

Step 4: Install the New Screen

Connect the new screen to the device by fastening it to the motherboard. Ensure that all connections are secure.

Step 5: Test and Assemble Back

Once the new screen is connected, power on your device to test the new display. If the screen operates as expected, turn off the device again and reassemble it.

Replacement of other components such as battery and camera follows a similar procedure, and should be performed with caution to avoid damaging the device or the new components.