Wiko View 4 Lite spare parts

    There are 2 products.

    Wiko View 4 Lite Repuestos - Technical Specifications

    The Wiko View 4 Lite is a device with various replaceable components that may need repair or replacement over time. The technical specifications for these components are detailed below:

    Display

    • Type: IPS LCD
    • Size: 6.52 inches, 102.6 cm2 (~82.2% screen-to-body ratio)
    • Resolution: 720 x 1600...

    Wiko View 4 Lite Repuestos - Technical Specifications

    The Wiko View 4 Lite is a device with various replaceable components that may need repair or replacement over time. The technical specifications for these components are detailed below:

    Display

    • Type: IPS LCD
    • Size: 6.52 inches, 102.6 cm2 (~82.2% screen-to-body ratio)
    • Resolution: 720 x 1600 pixels, 20:9 ratio (~269 ppi density)

    Battery

    • Type: Li-Po 4000 mAh, non-removable

    Camera

    • Main Camera: 13 MP, f/2.2, (wide), 1/3.1", 1.12µm, AF
    • Features: Led flash, panorama, HDR

    Instructions on how to replace Wiko View 4 Lite Repuestos

    Before you start, make sure you have the necessary tools, such as a small Phillips screwdriver, a plastic opening tool, and a spudger. Always disconnect the battery first to avoid short circuits during the replacement process.

    Display Replacement

    Follow these steps to replace your Wiko View 4 Lite's display:

    • Turn off your device.
    • Remove the back cover using a plastic opening tool.
    • Disconnect the battery connector from the motherboard.
    • Unscrew and remove the protective metal plate covering the display connector.
    • Use a spudger to disconnect the display connector.
    • Remove the old display. Install the new one and follow these instructions in reverse order to reassemble your device.

    Battery Replacement

    Follow these steps to replace your Wiko View 4 Lite's battery:

    • Turn off your device.
    • Remove the back cover using a plastic opening tool.
    • Disconnect the battery connector from the motherboard.
    • Remove the old battery. Install the new one and follow these instructions in reverse order to reassemble your device.

    Camera Replacement

    Follow these steps to replace your Wiko View 4 Lite's camera:

    • Turn off your device.
    • Remove the back cover using a plastic opening tool.
    • Disconnect the battery connector.
    • Use a spudger to disconnect the camera connector from the motherboard. Remove the old camera.
    • Install the new camera and reassemble your device following these steps in reverse order.
    Less
    More
    Showing 1 - 2 of 2 items