Wiko View Go spare parts

Wiko View Go Repuestos - Technical Specifications

The Wiko View Go Smartphone is recognized for its robustness and affordable prices. However, like any device, it may occasionally require a replacement of parts for its optimal performance. Here, we will review some of the essential Wiko View Go repuestos (spare parts) and specifications:

• Screen: 5.7" IPS LCD, resolution 1440 x 720 pixels
• Processor: Quad-core 1.3 GHz Cortex-A53
• Battery: 3000 mAh
• RAM: 2 GB
• Internal Storage: 16GB (expandable to 128GB with MicroSD)
• Camera: 13MP Rear, 5MP Front-facing
• Operating System: Android 8.1 (Oreo)

Instructions for Replacing Wiko View Go Repuestos

Before starting the replacement procedure, ensure the power is off and the device is disconnected from any power source. The following instructions apply to general parts replacement. However, consider professional help if the part is critical like the motherboard or if you are not confident in performing the replacement:

• Screen Replacement

  Start by removing the back cover of the device. Proceed to disconnect the battery. Unscrew the necessary screws to detach the screen connector. Replace the old screen with a new one, and reassemble the device.

• Battery Replacement

  You will need a special tool called a spudger to pry open the back cover. Once open, disconnect the old battery’s connector and replace it with the new battery. Make sure to place the new battery correctly and close the back cover.

• Camera Replacement

  To replace the camera, remove the back cover using a pry tool or spudger. Find the camera module and remove the screws that secure it to the motherboard. Replace the old camera module with the new one and screw it back in place. Replace the back cover after the camera module replacement.