Wiko View Prime

Wiko View Prime Technical Characteristics

The Wiko View Prime is a powerful and sleek smartphone packed with a multitude of features. The following are some of its standout technical specifications.

• Display: 5.7-inch IPS LCD, 720 x 1440 pixels
• Processor: Qualcomm Snapdragon 430
• RAM: 4GB
• Storage: 64GB, expandable via microSD
• Camera: Dual Front - 20MP + 8MP, Rear -16MP
• Battery: 3000mAh
• Operating System: Android 7.1 Nougat

Replacing Wiko View Prime Instructions

Here is a detailed guide on how to replace the Wiko View Prime. It is recommended that the procedure is conducted under safe conditions, preferably by a professional. Always switch off the device before beginning.

Tools Required:

• Sim Card Ejector
• Screwdriver
• Spudger
• Plastic Pry Tool

Procedure:

Step 1: Removing the Back Cover

• Switch off the device and remove the SIM tray using the SIM card ejector.
• Using the plastic pry tool, carefully pry off the back cover starting from the bottom.

Step 2: Battery Removal

• Use the screwdriver to remove the screws anchoring the battery.
• Carefully lift the battery connector, then lift the battery from the phone.

Step 3: Removing the Motherboard

• Disconnect the connectors linking the motherboard to the phone.
• Remove all screws securing the motherboard
• Use the spudger to carefully pry the motherboard off the phone.

Step 4: Replacing the Old Phone

• Reverse the above steps to assemble your new Wiko View Prime.

Please remember that each step requires patience and precision. If you run into any hurdles, it's advisable to consult with a professional to avoid causing permanent damage to your Wiko View Prime.