Xiaomi 12 5G spare parts

Xiaomi 12 5G Repuestos Technical Characteristics

The Xiaomi 12 5G repuestos is a dynamic, technologically advanced smartphone component. High-accuracy machining and cutout ensure they fit perfectly into the respective phone.

Screen and Display Module

This part includes the main display panel of the smartphone. Its characteristics are:

• Dynamic AMOLED 2X Screen
• 6.8 inches screen size
• Resolution: 3200 x 1440 pixels

Battery Module

The Battery module stores and supplies power to the smartphone. It has the following characteristics:

• Capacity: 5000mAh
• Type: Li-Po, non-removable

Main Camera Module

This part includes the primary camera system of the smartphone. Its features include:

• Triple-lens:
  • 108 MP, f/1.9, (Wide)
  • 13 MP, f/2.4, (Ultra Wide)
  • 5 MP, f/2.4, (Macro)

Instructions for Replacing Xiaomi 12 5G Repuestos

Please follow these steps carefully to replace the Xiaomi 12 5G repuestos. Make sure you have the necessary tools and your working area is clean.

Step 1: Remove Back Cover

Use a heat gun or a heating pad to soften the adhesive holding the back cover. Then, carefully use a suction cup and opening picks to lift the back cover from the top right edge around the perimeter.

Step 2: Disconnect Battery Connector

With the back cover removed, locate the battery connector on the phone's motherboard. Use a plastic spatula or tweezers to carefully disconnect it.

Step 3: Removing the Requisite Module

Identify the module that needs replacing and remove the screws securing it using a suitable screwdriver. Then gently lift the board from the case.

Step 4: Installation of the New Module

Position the new module in the correct orientation and press it firmly into place. Secure it with the screws previously removed.

Step 5: Reconnecting the Battery

Reconnect the battery connector by pressing it back into the receptacle on the motherboard. Make sure it is fully seated and secure.

Step 6: Replacing the Back Cover

Align the back cover to the phone body and press it back into place. You may use fresh adhesive if necessary.

Note: Be patient and careful throughout the process to avoid any damage. If uncomfortable with the process, seek professional help.