Xiaomi Black Shark 3 Pro spare parts

Xiaomi Black Shark 3 Pro Technical Specifications

The Xiaomi Black Shark 3 Pro is an advanced gaming smartphone with notable features ideal for the avid gamer. Here are its main characteristics:

• Screen: 7.1" AMOLED, 1440 x 3120 pixels, with 90Hz refresh rate
• Processor: Qualcomm Snapdragon 865
• RAM: 8GB/12GB
• Storage: 256GB/512GB
• Battery: 5000 mAh, Fast charging 65W
• Camera: 64 MP (wide) + 13 MP (ultrawide) + 5 MP (depth)

Replacing Xiaomi Black Shark 3 Pro Parts

Please note that smartphone repair requires precision and care. Failing to correctly execute these steps may result in damage to the device that cannot be reversed. Proceed with caution.

Step 1: Power off your phone

Before initiating any repairs, please ensure that your Black Shark 3 Pro is fully powered off and disconnected from any power sources.

Step 2: Remove the back cover

Use a heat gun to soften the adhesive surrounding the edges of the back cover. Once adequately softened, use a suction cup and thin plastic pry tool to slowly and carefully lift open the cover.

Step 3: Disconnect the battery

Before handling any other components, find and unscrew the battery connector shield. Then, carefully disconnect the battery connector.

Step 4: Replace damaged part

Locate the part that needs to be replaced, it could be the screen, camera, or other component. Use the appropriate tool to remove the screws securing the part and carefully remove it. Then, place the new piece, making sure it fits perfectly and secure it with the screws.

Step 5: Reassemble your phone

Reconnect the battery and carefully place the back cover onto the phone. You may want to use a small amount of adhesive to secure it. Power on your phone and check that everything works correctly.

Note: This is a general guide. Specific parts may require specific instructions for removal and installation. Always refer to a guide specific to the part you are replacing.