Xiaomi Black Shark Helo spare parts

Xiaomi Black Shark Helo Technical Characteristics

The Xiaomi Black Shark Helo boasts a variety of unique and highly competent characteristics that make the device a choice fixture for tech lovers and gamers alike.

• Display: 6.01-inch AMOLED capacitive touchscreen, 16M colors
• Resolution: 1080 x 2160 pixels
• OS: Android 8.0 (Oreo), upgradable to Android 10, JoyUI 11
• Chipset: Qualcomm SDM845 Snapdragon 845
• Battery: Non-removable Li-Ion 4000 mAh battery

Replacing Xiaomi Black Shark Helo Repuestos

The step-by-step procedure for replacing Xiaomi Black Shark Helo repuestos includes:

Tools Needed:

• Eject Pin
• Screwdriver
• Pry tool
• Tweezer

Procedure

Following are the step-wise instructions to replace the repuestos of your Xiaomi Black Shark Helo

• Step 1: Switch off the Xiaomi Black Shark Helo. Remove the SIM Card tray using the Eject Pin.
• Step 2: Unscrew the two tiny screws at the bottom of the phone. Using a pry tool, insert into the narrow gap between the screen and the rear cover. Go around the edges to unclip the back cover.
• Step 3: Once the back cover is removed, the internals of the phone are exposed. Here, unscrew the screws to remove the motherboard cover and expose the main board beneath.
• Step 4: Disconnect all cables attached to the motherboard. Every connector needs careful attention in this process due to their sensitive nature.
• Step 5: Unscrew and remove the motherboard. Now, the main part - repuestos- is exposed completely.
• Step 6: Replace the faulty Xiaomi Black Shark Helo repuestos with the new ones. Be sure all the connections are connected back correctly.
• Step 7: Follow the previous steps in reverse order to reassemble the device.

Remember, smartphone repair needs patience and precision. If you are uncomfortable doing this yourself, it is highly recommended to get professional assistance.