Xiaomi Mi4s spare parts

Xiaomi Mi4s Repuestos Technical Specifications

The Xiaomi Mi4s is a powerful and compact smartphone that comes equipped with impressive technical features for optimum performance.

• Display: 5.0 inches, IPS LCD, 1080 x 1920 pixels
• Processor: Qualcomm MSM8992 Snapdragon 808
• Memory: 16GB 2GB RAM, 64GB 3GB RAM, microSDXC (uses shared SIM slot)
• Camera: 13 MP, f/2.0, PDAF; Selfie Camera: 5 MP, f/2.0
• Battery: Non-removable Li-Ion 3260 mAh battery

Replacing Xiaomi Mi4s Repuestos: Step by Step Guide

Tools Needed:

Before beginning, ensure you have a Philips #000 screwdriver, a plastic opening tool, and a spudger.

Step 1: Removing the Back Cover

To remove the back cover, you first need to loosen it by applying or generating heat to the edges of the phone using a heat gun or a blow dryer. Please do this carefully and not overheat, as it can damage sensitive internal components. Then use a plastic opening tool or your fingernails to pry off the back cover slowly.

Step 2: Removing the Battery

Before removing the battery, first disconnect the battery connector using a spudger, starting from the bottom up. Remove all 6 screws securing the top metal bracket using the Philips #000 screwdriver, then lift away the bracket.

Step 3: Replacing the Component

At this point, depending on the Mi4s repuesto you are replacing, it could be the motherboard, the camera, the speaker, etc. Locate the faulty part, and gently remove it using the spudger. Place the new component in the proper place, make sure it fits correctly, and connects to the motherboard properly.

Step 4: Reassembly

After replacing the part, screw back the top metal bracket securing the battery and push down the battery connector. Snap the back cover back on, making sure it clicks in place all around the edges.

Remember, all smartphone reparations should be done with patience and care to avoid any damage. If unsure, please seek professional help.