Zopo ZP530 spare parts

Zopo ZP530 Technical Specifications

The Zopo ZP530 smartphone is known for its durability and functional design. Here are its main technological features in detail:

• Processor: Mediatek MT6732
• Screen Size: 5.0 inches IPS, 24 bit
• RAM: 1GB
• Storage: 8GB internal memory, expandable by microSD up to 32GB
• Operating System: Android 4.4 KitKat
• Camera: 8-megapixel rear, 2-megapixel front
• Battery: 2100 mAh, Li-Ion
• Dimensions: 143.9 mm x 71.7 mm x 8.65 mm

Replacement of Zopo ZP530 Repuestos:

Here is a detailed step-by-step instruction on how to replace the parts of the Zopo ZP530 smartphone. Please, before starting, assure that you have necessary tools.

Step 1: Power Off and Removing the Back Cover:

First, switch off the device. Once it's turned off, remove the back cover. This can be done by inserting your fingernail in the small gap located at the bottom of the device and then lifting up the cover.

Step 2: Removing the Battery:

Take the battery out by lifting it from the bottom edge.

Step 3: Removing the Screws:

Use a screwdriver to remove all the visible screws.

Step 4: Detaching the Motherboard:

Carefully detach the motherboard connectors using a plastic opening tool. Only after the connectors are entirely detached, remove the motherboard.

Step 5: Replacing the Part:

Depending on the part that needs to be replaced (such as camera module, speaker, etc.), remove the defective one gently and replace it with the new one. Pay close attention to connector positions and cables.

Step 6: Re-Assembly:

Once the replacement is done, assemble the parts in the reverse order following Steps 4 to 1. Make sure the screws are tight and the back cover snaps perfectly into place.