ZTE Axon 20 4G spare parts

ZTE Axon 20 4G Technical Specifications

The ZTE Axon 20 4G is a powerful smartphone with many notable features. This includes:

• Screen: 6.92 inch OLED, 1B colors, 90Hz, 1080 x 2460 pixels resolution.
• Processor: Qualcomm SDM765 Snapdragon 765G (7 nm).
• Ram: 6GB/8GB RAM.
• Internal Storage: 128GB/256GB, expandable via microSD
• Operating System: Android 10, MiFavor 10.5
• Camera: 64MP wide, 8MP ultrawide, 2MP macro, 2MP depth.
• Battery: 4220mAh Li-Ion, non-removable

How to Replace ZTE Axon 20 4G Components

Please note, smartphone repair should be performed only by individuals who have expertise in the process. Incorrect execution may result in void warranties or damage to the device.

Before Replacement

• Ensure the device is switched off and disconnected from a power source.
• Use a heat gun or hair dryer to warm up the edges of the back cover and use suction cups to pry it open.

Replacing The Battery

• Disconnect battery connector from motherboard.
• Gently pry and remove the battery. Apply adhesive strips when reattaching the new battery.

Replacing The Screen

• Remove screws securing the screen.
• Disconnect screen connectors from motherboard and remove screen assembly.
• Install new screen after removing old adhesive and applying new adhesive strips.

Replacing The Camera

• Disconnect camera module ribbon from motherboard and gently lift camera module.
• Replace the camera and reconnect the new module ribbon.

Recommended Workshop Tools

During repair, the following tools are needed:

• Screwdriver Set
• Suction Cup Plunger
• Plastic Spudger
• Reuseable adhesive

After the replacement of all necessary components, ensure you secure the back cover tightly and avoid exposing the internals to dust. Power on the device and check if the replaced component is working as intended. This may include taking a photo (for camera replacement), checking if the touch is responsive (screen), or seeing how long the battery lasts (battery).