ZTE Axon 30 spare parts

ZTE Axon 30 Repuestos: Technical Specifications

The ZTE Axon 30 is an advanced device, widely recognized for its superior hardware and design. Here are some key specifications of the ZTE Axon 30 Repuestos:

• Display: 6.92 inches AMOLED, HDR10, 120Hz, 1B colors
• Resolution: 1080 x 2460 pixels
• OS: Android 11, MyOS 11
• Chipset: Qualcomm SM8250-AC Snapdragon 870 5G
• Memory: Internal 128GB 6GB RAM, 128GB 8GB RAM, 256GB 12GB RAM
• Battery: Li-Po 4200 mAh, non-removable
• Sensors: Fingerprint (under display, optical), accelerometer, gyro, proximity, compass

Instructions to Replace ZTE Axon 30 Repuestos

The following are step-by-step instructions on how to replace the ZTE Axon 30 repuestos. Note: This task requires precision, care, and patience:

Required Tools

• Screwdriver
• Spudger
• Tweezers
• Opening tool

Step-by-Step Instructions

Please ensure that the phone is turned off before starting the repair process.

• Open the phone with an opening tool and remove the back cover carefully.
• Remove the screws with a screwdriver that secures the motherboard cover.
• Lift the motherboard cover using a spudger. Ensure not to damage any surrounding ribbons or connectors.
• Disconnect the battery connector using the spudger for safety.
• Now, disconnect the flex cables connected to the motherboard. Be gentle as these can be fragile.
• You can now replace the required repuesto. Replace it carefully.
• After replacing the part(s), reassemble the device by following the steps in reverse order.

Note that while working with mobile device components, please ensure to keep your workspace clean and organized to avoid losing any components or screws.