ZTE Blade S6 Plus spare parts

ZTE Blade S6 Plus Repuestos: Technical Characteristics

The ZTE Blade S6 Plus is a versatile smartphone, and its parts (repuestos) are designed for performance and durability. Here are some of the primary repuestos and their technical characteristics:

• Display: The smartphone features a 5.5-inch In-Cell screen with a resolution of 1280 x 720 pixels (267 PPI).
• Processor: The Blade S6 Plus is powered by a Qualcomm Snapdragon 615 MSM8939 processor for fast and effective performance.
• Battery: A Li-ion 3000 mAh battery powers the Blade S6 Plus, offering long hours of usage on a full charge.
• Camera: The device offers a 13 MP rear camera and a 5 MP front camera for crisp and clear photos.

Instructions for Replacing ZTE Blade S6 Plus Repuestos

Please follow these step-by-step instructions to replace the repuestos of the ZTE Blade S6 Plus:

Tools Required

• Small Phillips Screwdriver
• Plastic Pry Tool
• Tweezers

Procedure

• Step 1: Start by powering off your ZTE Blade S6 Plus.

• Step 2: Remove the SIM card tray by using your SIM card removal tool.

• Step 3: Remove the back cover using the plastic pry tool.

• Step 4: Unscrew all visible screws using the Phillips Screwdriver.

• Step 5: Carefully pull up the battery connector using the pry tool or tweezers, then remove the battery.

• Step 6: Follow a similar procedure for other parts (Display, Processor, and Camera) after unscrewing fasteners and clips.

• Step 7: Install the new parts and reassemble your phone by following these instructions in reverse order.

Remember, if you are not confident in performing these repairs on your own, it’s best to seek assistance from a professional technician.