ZTE Blade V2020 spare parts

ZTE Blade V2020 Repuestos Technical characteristics

The ZTE Blade V2020 smartphone is equipped with a broad variety of features, making it a multifaceted tool for daily communications. Here's what you need to know about its spare parts:

Display

The device is equipped with a 6.82-inch LTPS IPS LCD display with a resolution of 1080 x 2400 pixels.

Processor

The device is powered by the MediaTek Helio P70 Octa-core Processor.

Battery

A non-removable Li-Ion 4000 mAh battery powers the Blade V2020.

Camera

The device sports a Quad rear camera setup including a 16MP main sensor. There is an 8MP selfie camera at the front.

How to replace ZTE Blade V2020 Repuestos

Here are detailed instructions to replace parts for ZTE Blade V2020:

Tools Needed

• Assorted pry tools and tweezers
• Screwdriver kit
• Plastic opening tools
• Heat gun or dryer

Replacement Procedure

Here are the steps involved in the replacement process:

• Step 1: Power off the phone and remove the SIM card tray.
• Step 2: Heat the edges of the phone to soften the adhesive. Use a plastic opening tool to pry open the back cover.
• Step 3: Remove the screws securing the metal shield to the motherboard using the screwdriver. Remove the metal shield and disconnect the battery connector.
• Step 4: Remove the flex connector of the part that needs replacement. Once disconnected, you can now remove the damage part.
• Step 5: Replace the damaged part with the new one, ensuring it is securely connected.
• Step 6: Re-attach all connectors to the motherboard and secure the metal shield.
• Step 7: Attach the back cover ensuring all the edges are firmly attached.
• Step 8: Power on the phone to ensure the new part is functioning properly.

Please note that this should only be attempted if you have experience with mobile phone repairs, as improper handling could result in damage. Always ensure the phone is turned off before beginning the process.