ZTE Kiss 2 Max V815 spare parts

ZTE Kiss 2 Max V815 Repuestos Technical Characteristics

The ZTE Kiss 2 Max V815 is renowned for its design and durability. However, parts can wear out over time and may need replacement. Below are the technical characteristics of the commonly replaced parts (repuestos) of the ZTE Kiss 2 Max V815.

• Screen:

  The device comes with a capacitive touchscreen that is approximately 5.0 inches in size. The screen delivers a resolution of 480 x 854 pixels and presents 16M colors. It is also coated with a multi-touch feature.

• Battery:

  The ZTE Kiss 2 Max V815 uses a removable Li-Ion 2000 mAh battery that provides up to 350 hours on standby mode and up to 8 hours on talk time.

• Camera:

  The device is equipped with a 5 MP, f/2.8 rear camera and a 2 MP, f/2.8 front camera.

Instructions for ZTE Kiss 2 Max V815 Repuestos Replacement

Before you start, ensure to backup all your data, power off the device, and remove the SIM card and memory card. Also, remember to use tools specifically designed for mobile devices to avoid any damage.

Disclaimer: This guide is provided for instructional purposes only. Proceed at your own risk. Damage brought about by changes to the device is not covered by the manufacturer's warranty.

• Screen Replacement:

  Gently pry open the back cover from the notch located at the bottom. Remove the battery, and then remove the screws using a precision screwdriver. Lift the screen connector using a thin plastic opening tool. Now, replace the defective screen with a new one and reassemble the parts in reverse order.

• Battery Replacement:

  Open the back cover from the bottom notch. Just remove the battery by lifting it. Insert the new battery and seal the back cover properly.

• Camera Replacement:

  After opening the back cover and removing the battery, unscrew the screws holding the motherboard. Carefully lift the connectors for the front and rear cameras. Now, replace the faulty camera with the new one, then reassemble the device in reverse order.