ZTE Nubia N3 spare parts

ZTE Nubia N3 Repuestos Technical Specifications

The ZTE Nubia N3 is a high-performing smartphone of ZTE's line-up. The set of repuestos for the Nubia N3 provide users with the necessary parts for maintenance and repair of their device.

• Display: IPS LCD 5.99", 1080 x 2160 pixels.
• Memory: 64GB 4GB RAM, 128GB 6GB RAM.
• Camera: Dual: 16 MP + 5 MP (Main), 16 MP (Selfie).
• Battery: Non-removable Li-Ion 5000 mAh battery.
• Operating System: Android 7.1 (Nougat).

Instructions on Replacing ZTE Nubia N3 Repuestos

Disclaimer: These instructions should be followed carefully. Damage resulting from personal repair attempts will void any warranty on the device. We strongly recommend seeking professional help when replacing smartphone components.

Instructions for ZTE Nubia N3 Battery Replacement

Following starting warning carefully before you begin:

• Ensure the phone is powered off completely before beginning the repair process.
• Remove all peripheral devices such as SIM cards, memory cards, or headphones.
• It is suggested to work in a clean and dust-free environment to avoid damage to the device's internal components.

Step-by-step process:

• Use a small, precision screwdriver to remove the two screws on the bottom edge of the device.
• Gently pry open the phone's casing using a plastic opening tool.
• Once inside the phone, disconnect the battery connector using a pair of tweezers.
• Release the battery from its adhesive hold using a plastic card, moving it slowly underneath the battery.
• Once the battery is free, install the replacement battery and reassemble the device in reverse order.

Instructions for ZTE Nubia N3 Screen Replacement

Follow the same initial warnings as above and then utilize the following steps:

• Remove screws at the bottom of the device and use a plastic opening tool to open the phone.
• Detach the connectors for the screen from the motherboard.
• Use a plastic card or similar tool to slowly and carefully remove the screen assembly from the frame.
• Place the new panel on the phone and reconnect it to the motherboard.
• Reassemble the remainder of the phone as per the initial disassembly.