ZTE Nubia Red Magic 3 spare parts

ZTE Nubia Red Magic 3 Repuestos Technical Characteristics

The ZTE Nubia Red Magic 3 repuestos possess the following technical characteristics:

• Brand: ZTE
• Model: Nubia Red Magic 3
• Operating System: Android 9.0 (Pie), upgradable to Android 10, Redmagic 3.0
• Processor: Octa-core (1x2.84 GHz Kryo 485 & 3x2.42 GHz Kryo 485 & 4x1.8 GHz Kryo 485)
• Screen: AMOLED, 16M Colors, 1080 x 2340 pixels, 6.65 inches
• Battery: Non-removable Li-Po 5000 mAh battery
• Camera: 48MP rear, 16MP Front

Instructions for Replacing ZTE Nubia Red Magic 3 Repuestos

Follow the steps below carefully to replace the ZTE Nubia Red Magic 3 repuestos:

Disclaimer

Opening your smartphone can cause damage and void your warranty. Proceed with caution and at your own risk.

Tools Needed

• Set of precision screwdrivers
• Plastic opening tools
• Tweezers

Step by Step Guide

Step 1: Battery Replacement

Power off your phone before you begin to prevent any damage.

Step 2: Removing the Back Cover

Using the plastic opening tools, carefully pry open and remove the back cover of the phone from the rest of the body.

Step 3: Removing the Battery

Remove the screws holding the battery. Carefully disconnect the battery connector using the plastic opening tools, then gently remove the battery from the phone.

Step 4: Replacing the Battery

Place the new battery in the phone, then connect the battery connector. Reinsert the screws to secure the battery.

Step 5: Replacing the Back Cover

Replace the back cover securely onto the rest of the phone.

Step 6: Power On Your Phone

Power on your phone to confirm that the new battery is working properly.

Tips and Warnings

• Ensure you're working in a clear, clean and well-lit environment.
• Keep the screws in a safe location, as you'll need to replace them.
• Avoid applying excess force when removing and replacing parts to avoid damages.