ZTE Nubia Red Magic 8 Pro Plus 5G spare parts

ZTE Nubia Red Magic 8 Pro Plus 5G Repuestos Technical Characteristics

The ZTE Nubia Red Magic 8 Pro Plus 5G repuestos have several technical characteristics that make them reliable and durable. Below we detail these features:

• Screen resolution: 2400 x 1080 pixels, AMOLED.
• Camera: Main 64MP, Wide-angle 8MP, Macro 2MP.
• Battery: 5000mAh, Li-Po, Non-removable.
• Charging Port: USB-C 3.1 connector.

Instructions for Replacing ZTE Nubia Red Magic 8 Pro Plus 5G Repuestos

Tools Needed

• Screwdrivers: Torx T4, Phillips #00, and Small Flat.
• Eject Pin.
• Spudger or plastic opening tools.
• Heat gun or hairdryer.
• Adhesive or double-sided tape.

Procedure

WARNING: This procedure will void your warranty. Proceed at your own risk.

• Ensure the phone is powered off.
• Use the eject pin to remove the SIM card tray.
• Use a heat gun or hairdryer to soften the adhesive securing the back cover.
• Start from the bottom using a spudger to pry up the back cover, working your way around the phone.
• Remove all screws using the Torx T4 and Phillips #00 screwdrivers.
• Carefully pull up on the plastic cover to expose the motherboard. Be careful of the various cable connectors attached to the board.
• Disconnect cables and replace the faulty components as necessary. Be cautious while handling delicate connectors.
• Reassemble by reversing the steps. Ensure all connections are in place and screws are tightened.
• Once reassembled, power on the device to test for functionality.