ZTE Nubia Z11 Max NX523J

ZTE Nubia Z11 Max NX523J Specifications

The ZTE Nubia Z11 Max NX523J is a potent device that provides an appreciable mix of features. Here are some of the technical details:

• Display: 6.0 inch Super AMOLED
• Resolution: 1080 x 1920 pixels
• Processor: Qualcomm MSM8976 Snapdragon 652
• RAM: 4GB
• Internal Storage: 64GB, expandable up to 256GB
• Camera: 16MP Rear / 8MP Front
• Battery: 4000mAh
• OS: Android 5.1.1 (Lollipop), upgradable to 6.0.1 (Marshmallow)

Instructions for Replacing ZTE Nubia Z11 Max NX523J

Disclaimer: This process involves certain risks and potential voiding of your warranty. Proceed with caution.

Tools Needed

• Small Phillips screwdriver
• Plastic opening tools
• Spudger

Steps to Replace Screen

Please make sure that the phone is turned off before starting the replacement process.

• Remove the SIM card tray from the phone.
• Use the plastic opening tool to pry and separate the back cover from the body of the phone.
• Unscrew the screws holding the protective metal plate in place over the motherboard. They can be removed using the small Phillips screwdriver.
• Once the screws are removed, use a spudger to gently lift the protective metal plate.
• Carefully disconnect the battery and the display connectors from the motherboard.
• Now remove the defective screen from the phone. It may be adhered to the phone, so be gentle to avoid damage.
• Place the new screen in position and connect it to the motherboard.
• Reconnect the battery connector to the motherboard.
• Re-apply the protective metal plate and screw it back in place.
• Re-attach the back cover securely.
• Insert the SIM card tray back into the phone.

Switch on the phone and make sure the new screen is functioning properly.

Warning

This guide is for informational purposes only and we will not be responsible for any damage caused during the replacement process. It's recommended to consult an expert if you're not familiar with mobile repairs.