ZTE Nubia Z17S spare parts

ZTE Nubia Z17S Repuestos Technical Specifications

The ZTE Nubia Z17S repuestos originate from the ZTE Nubia Z17S model. The product's main distinguishing characteristics are as follows:

• Display: 5.73 inches, 1080 x 2040 pixels, LTPS IPS LCD capacitive touchscreen, 16M colors.
• Processor: Octa-core (4x2.45 GHz Kryo & 4x1.9 GHz Kryo)
• RAM: 6GB/8GB
• Internal Storage: 64GB/128GB, non-expandable.
• Camera: Dual main camera 12 MP + 23 MP, Dual selfie camera 5 MP + 5 MP.
• Battery: Non-removable Li-Po 3100 mAh battery.

Instruction for replacing ZTE Nubia Z17S repuestos

Before you begin, make sure you have the correct replacement parts and tools. You'll need a plastic opening tool, a PH00 screwdriver, and a new ZTE Nubia Z17S repuestos.

Step 1: Power Off your phone

Before starting your repair, ensure to turn off your device to avoid any electrical damage.

Step 2: Remove Back Cover

Use the plastic opening tool to pry up and remove the back cover from the rest of the phone.

Step 3: Remove Battery

Remove the battery by loosening the four screws at each corner with the PH00 screwdriver. Lift the battery and disconnect it from the mainboard.

Step 4: Replace Component

Depending on the part you're replacing, the steps may vary. Be sure to handle all components with care to avoid damage to delicate parts.

Step 5: Reassemble Phone

Once you've replaced the component, reassemble the phone by reversing the steps. Connect the battery, attach the back cover, and power on the phone. If everything is working properly, the repair was successful.

Please note this is a general guide, and some details may vary depending on the specific part you're replacing.