ZTE U880E spare parts

    There is 1 product.

    ZTE U880E Repuestos Technical Characteristics

    The ZTE U880E is an Android smartphone with several key components that are pertinent to its performance. These can be replaced in case of damage or wear and tear.

    Main Components

    • Screen: The ZTE U880E sports a 4.0 inch WVGA capacitive touchscreen with a display resolution of 480 x 800 pixels.
    • Bat...

    ZTE U880E Repuestos Technical Characteristics

    The ZTE U880E is an Android smartphone with several key components that are pertinent to its performance. These can be replaced in case of damage or wear and tear.

    Main Components

    • Screen: The ZTE U880E sports a 4.0 inch WVGA capacitive touchscreen with a display resolution of 480 x 800 pixels.
    • Battery: It has a Lithium-Ion battery with a capacity of 1600mAh.
    • Camera: The device is equipped with a 3.2 MP rear camera that can be replaced if needed.
    • Speaker: The speaker unit is located at the bottom of the phone and can be replaced in case of sound problems.

    ZTE U880E Repuestos Replacement Instructions

    Below are the instructions for replacing the ZTE U880E repuestos. Always remember to power off your device and remove the battery before starting any repair process.

    Screen Replacement

    Follow these steps to replace the screen:

    • Unscrew the device and carefully remove the back cover.
    • Unplug the screen connector from the motherboard.
    • Replace the old screen with the new one and reconnect it to the motherboard.
    • Reassemble the device.

    Battery Replacement

    Below are the steps for battery replacement:

    • Remove the back cover to expose the battery compartment.
    • Take out the old battery and replace it with the new one.
    • Replace the back cover.

    Camera Replacement

    If you need to replace the camera, follow these steps:

    • Remove the back cover and the battery.
    • Unscrew the screws securing the camera in place and unplug it from the motherboard.
    • Replace the old camera with the new one, plug it into the motherboard and secure it with the screws.
    • Replace the battery and the back cover.

    Speaker Replacement

    The steps to replace the speaker are as follows:

    • Remove the back cover and battery.
    • Unplug the speaker from the motherboard.
    • Replace the old speaker with the new one and plug it into the motherboard.
    • Replace the battery and reassemble the device.

    Less
    More
    Showing 1 - 1 of 1 item