ZTE V2020 Smart spare parts

ZTE V2020 Smart Repuestos Technical Characteristics

The ZTE V2020 Smart is a versatile smartphone with several features that make it robust for its range. It also serves as an optimal device to learn or enhance smartphone repair skills.

• Model: ZTE V2020 Smart
• Screen: The phone comes with a 6.53" FHD+ display, 1080 x 2340 pixels.
• Processor: MediaTek Helio P70
• RAM: 6GB
• Storage: 128GB
• Battery: 4000mAh capacity
• Camera: Quad rear camera (48 MP + 8 MP + 2 MP + 2 MP) and a single 16MP front camera

Replacement Instructions

Tools Needed

To replace the various ZTE V2020 Smart parts, you will need the following tools:

• Screwdriver
• Plastic opening tools
• Tweezers
• Hot air gun or electric hairdryer

Steps for Replacement

Please follow these steps carefully to replace ZTE V2020 Smart parts:

• Remove the Back Cover

  Turn off the phone. Use a hot air gun or hairdryer to warm up the back cover to loosen the adhesive. Use the plastic opening tool to pry the back cover open.

• Remove the Battery

  Remove the screws from the shield that protects the battery connector. Then, using the plastic opening tool, disconnect the battery connector. Remove the battery after this.

• Replace the Required Part

  After following the above steps, the replacement of specific parts (like the camera or screen) can be performed. Always make sure to carefully disconnect any cables connected to the part you are replacing.

• Reassembly

  After replacing the defective parts, reassemble the phone by reattaching and connecting the battery, attaching the protective shield over the battery connector, attaching the back cover, and fastening all the screws.

NOTE: These steps are a general guide and may not apply to every situation. Each repair can have unique challenges due to a variety of factors.