Night vision back camera by Ulefone RugKing 5 Pro 4G premium quality

20 MP rear night vision camera for Ulefone RugKing 5 Pro 4G premium quality

Rear night vision camera for Ulefone RugKing 5 Pro 4G in premium quality, designed to replace the module dedicated to capturing images in dark conditions. The RugKing 5 Pro features a 20 MP night vision camera with Sony IMX350 CMOS sensor and a 77.4-degree field of view, assisted by two infrared LEDs to operate even in the absence of ambient lighting. This replacement restores system operation when the camera has failures, physical damage or connection problems. Designed for professional installation and testing before closure.

Specifications

Component: rear night vision camera

Resolution: 20 MP

Sensor: Sony IMX350 CMOS

Field of view: 77.4 degrees

Associated system: two infrared LEDs

Function: image capture in low-light or dark conditions

Compatibility: Ulefone RugKing 5 Pro 4G

Quality: Premium

Premium quality provides precise assembly, stable electrical connection and proper response of the night vision system. This camera is suitable for replacing a module damaged by impacts, moisture, connection problems or damage caused during a previous repair. It maintains the night photography system characteristics specified for the RugKing 5 Pro, with 20 MP resolution and Sony IMX350 sensor. Correct installation restores night capture assisted by infrared illumination and reduces intermittent failures related to poorly seated connectors. Recommended for professional technical service and complete testing of Night Vision mode before final assembly. Available for immediate shipping from Spain.

Installation Tips

Disconnect the battery before handling the camera module.

Use ESD protection during the repair.

Remove the connector without forcing the flex cable or board.

Avoid directly touching the module lens.

Correctly align the connector before pressing it.

Check night vision mode before closing the device.

Also verify the operation of the infrared LEDs in dark conditions.

Carefully clean the optical area before final assembly.

Technical Table