Rear camera flex ultrawide 12 mpx by Google Pixel 6A premium quality

Rear Ultrawide Camera Flex 12 MP for Google Pixel 6a – Premium Quality

This is the rear 12 MP ultra-wide camera module for Google Pixel 6a. Built to premium standards, it serves as a replacement for the secondary rear lens when image distortion, app failure, or total sensor malfunction occurs.

Key Technical Features

• Sensor: 12.2 MP ultra-wide

• Field of View: 114°

• Compatible with: Google Pixel 6a

• Technical model numbers: GX7AS, GB62Z, G1AZG

• Precision FPC flex connector

• Direct mount design – no soldering required

Compatibility Warning

Pixel devices from the Pixel 6 onward use component-level pairing through the Titan M2 security chip, particularly for camera modules. Therefore:

• Even if physically compatible, the module may not be recognized by the system unless it's paired.

• This may lead to non-functional camera, with no image and no error messages, even if installed correctly.

• The issue is not due to the quality of the replacement part, but to firmware-level security limitations.

Usage Recommendations

• This module is intended only when the original ultrawide sensor fails physically and the system is still operational.

• Always test the part with the device open before sealing it, to ensure it’s detected and working.

• We strongly recommend this repair only for experienced technicians familiar with Pixel security systems.

Installation Tips

• Disconnect the battery before installing any internal component.

• Do not bend or force the flex cable; use proper tools and avoid pressure on the lens.

• Clean all connectors with isopropyl alcohol before insertion.

• Test the camera functionality while the phone is open to confirm full operation.

Technical Table