Rear small camera flex by Google Pixel 6A premium quality

Rear Secondary Camera Flex (Ultrawide) for Google Pixel 6a – Premium Quality

This part corresponds to the 12 MP ultrawide rear camera module on the Google Pixel 6a. Manufactured in premium quality, it includes both sensor and flex connector, and is suitable for replacing the secondary rear lens in case of physical damage, image distortion, or detection failure.

Technical Specifications

• Resolution: 12 megapixels

• Aperture: f/2.2

• Field of view: 114°

• Sensor type: Ultrawide (secondary rear)

• Connector: FPC flex

• Position: Rear camera array, upper section

• Compatible with: Google Pixel 6a GX7AS, GB62Z, G1AZG

Compatibility Notes

Google Pixel 6a uses the Titan M2 security chip, which binds components like cameras to the system firmware. Therefore:

• If the module is not paired, the system may not detect it, even if installed correctly.

• The camera may remain non-functional without any visual error.

• This part does not bypass pairing protection, and should only be used when the failure is physical and the device still recognizes the original module.

Installation Tips

• Disconnect the battery before starting the repair.

• Use antistatic and plastic tools.

• Do not bend or stretch the flex cable.

• Test before fully reassembling the device.

Technical Table