Signal antenna flex by Google Pixel 10 Pro premium quality

Signal antenna flex for Google Pixel 10 Pro GEHN3 G4QUR GN4F5 Premium quality

Signal antenna flex for Google Pixel 10 Pro GEHN3, G4QUR and GN4F5 in Premium quality, designed to restore radio frequency communication between the antenna system and the internal electronics of the device. The component corresponds to an ANT4 coaxial cable with part number G821-01167-03 and is listed as a common part for Pixel 10 Pro variants in the service documentation. It is suitable when there is cable damage, damaged connectors or continuity problems that may affect signal reception. Prepared for professional installation and testing before closure.

Specifications

Signal antenna flex.

ANT4 coaxial cable.

Compatible with Google Pixel 10 Pro.

Technical models GEHN3, G4QUR and GN4F5.

Part number G821-01167-03.

Radio frequency signal transmission function between the antenna system and the associated internal components.

Premium quality.

Premium quality provides good electrical continuity, firm contacts and precise dimensions to facilitate its placement inside the Google Pixel 10 Pro. This replacement part allows a damaged coaxial cable to be replaced when it has physical damage, deformed connectors or continuity losses resulting from impacts, disassembly or previous repairs. Correct installation helps maintain stable signal transmission between the antenna modules and the corresponding electronics. It is intended for professional repairs requiring assembly precision, firm connection and reduced incidents related to poor contacts, signal loss or damaged internal cables.

Available for immediate shipping from Spain.

Installation tips

Disconnect the battery before handling the antenna flex.

Use ESD protection throughout the repair.

Disconnect the coaxial terminals vertically and without applying torsion.

Correctly align the connectors before applying pressure.

Do not bend or mark the coaxial cable during assembly.

Check signal reception before final closure.

Verify that the connectors remain completely seated.

Replace the adhesives removed during disassembly when necessary.

Technical table