Sim tray black by Ulefone RugKing 2 Pro premium quality

Black SIM holder or tray for Ulefone RugKing 2 Pro premium quality

Black SIM holder or tray for Ulefone RugKing 2 Pro in premium quality, designed to replace the device tray when it has breakage, deformation, loss or fitting problems. The RugKing 2 Pro features a configuration for two Nano SIM cards and one microSD card using three independent positions. This replacement part restores the correct positioning of the cards and maintains a precise fit in the side slot. Intended for professional repair, it is advisable to compare the new tray with the removed one before inserting it permanently into the device.

Premium quality provides precise manufacture and a suitable fit for the Ulefone RugKing 2 Pro, facilitating the correct placement of Nano SIM and microSD cards in their corresponding positions. It is especially suitable when the previous tray is bent, broken or does not hold the cards correctly during insertion. A deformed holder can cause detection problems or make removal of the assembly difficult, so it is recommended to replace it before forcing it into the device. The tray should always be inserted respecting the orientation of the cards and without applying excessive pressure to the internal mechanism.

Installation advice

Completely power off the device before removing the tray.

Compare the new tray with the removed part before inserting it.

Correctly place the Nano SIM and microSD cards in their slots.

Check that the cards remain flat and correctly seated.

Do not force the tray if you notice resistance during insertion.

Verify detection of the SIM cards and microSD card after installation.

Technical table