Apple Watch 2 Spare parts

Repuestos Apple Watch 2 Technical Specifications

The Repuestos Apple Watch Series 2 is a smartwatch developed by Apple Inc. The following are its technical characteristics:

• Size: 42mm high, 36.4mm wide
• Display: Second-generation OLED Retina display with Force Touch
• Resolution: 312x390 pixels for 42mm version, 272x340 pixels for 38mm version
• Processor: Apple S2 dual-core processor
• Operating System: watchOS 3.0, upgradable to 6.2.8
• Battery: Non-removable Li-Ion battery, up to 18 hours (mixed usage)

Instructions For Replacing Repuestos Apple Watch 2

Tools Required

• Tri-Point Y000 Screwdriver
• A small suction cup
• Tweezers
• Opening picks
• Adhesive

Step-by-Step Guide

Follow these steps to efficiently replace the Apple Watch Series 2:

• Create an opening pick by inserting it into the small gap on the outer edge of the watch.
• Slowly and carefully slice through the adhesive holding the display in place and lift up the display.
• Remove the Force Touch sensor and the adhesive with the tweezers.
• Use the Tri-Point Y000 screwdriver to remove the two tiny screws securing the battery connector.
• After the connector is removed, use the opening picks to gently remove the battery.
• Remove the other parts carefully by repeating the initial procedure.
• Replace the parts and reassemble by reversing the order of steps you have taken.
• Finally, apply adhesive to hold everything in place. All done!

Note: This operation requires experience with disassembling and assembling delicate electronic devices. If you are unsure, it is recommended to take your watch to a professional technician to avoid permanent damage.