Huawei Watch 2 Pro

Huawei Watch 2 Pro: Technical Characteristics

The Huawei Watch 2 Pro is a high-end smartwatch that blends classic looks with modern technology. Its features and design make it a versatile wearable ideal for those who want both functionality and style.

• Display: 1.2-inch AMOLED 390x390 pixel resolution (326ppi)
• Processor: Qualcomm® Snapdragon™ Wear 2100
• Storage: 4GB
• Memory: 768MB RAM
• Battery: 420mAh (Approximately 1.5 days of mixed use)
• Operating System: Android Wear OS
• Connectivity: Bluetooth 4.1, Wi-Fi, NFC, 4G/LTE
• Sensors: Accelerometer, Gyroscope, Barometer, Heart Rate, Compass, Ambient Light, Capacitive Sensor

Instructions for Replacing Huawei Watch 2 Pro

Disclaimer: Replacing parts of your smartwatch may void the warranty. It's recommended that only professionals carry out this task.

Tools Required

• 1.5mm Hex Screwdriver
• Plastic opening tool
• Tweezers

Steps to Replace the Watch

Follow the steps described below to successfully replace your Huawei Watch 2 Pro:

1. Power off the device.
2. Remove the wrist straps. The strap removal switch is located on the underside of the strap.
3. Unscrew the four 1.5mm Hex screws from the back cover of the watch using the hex screwdriver.
4. Use a plastic opening tool to gently pry open the back cover.
5. Carefully lift the battery connector using the tweezers. It’s located on the top left corner of the motherboard.
6. Unscrew the screws holding the motherboard in place and lift it gently.
7. Replace the faulty part.
8. Return the motherboard to its place, reinstall screws and reconnect the battery connector.
9. Reseat the back cover, re-screw the watch body.
10. Attach the wrist straps back to the watch.
11. Turn on the device to ensure everything is working properly.

Following these steps should allow you to successfully replace parts on your Huawei Watch 2 Pro. If you encounter difficulties, contact a professional for assistance.