Sub camera lens by Oppo Reno 12 5G CPH2625 621036000286 Service Pack

The Oppo Reno12 5G CPH2625 features several rear cameras protected by individual external glass covers. This secondary camera glass, with part number 621036000286 and Service Pack quality, is designed to replace the protective cover of the auxiliary camera when it shows cracks, breakage, scratches or deterioration. Its function is to protect the optical area against direct contact with external elements and keep the image capture opening unobstructed. It allows a targeted repair without replacing the camera module when it remains functional, making it a suitable replacement part for professional repair technicians.

- Brand: Oppo.

- Compatible model: Oppo Reno12 5G.

- Technical model: CPH2625.

- Component: Rear secondary camera protective glass.

- Quality: Service Pack.

- Part Number (Part No): 621036000286.

- Material: Glass.

- Location: Auxiliary camera area on the rear of the device.

- Function: External protection of the secondary camera optical opening.

- Application: Replacement of cracked, scratched, broken or deteriorated secondary camera glass.

The Service Pack secondary camera glass 621036000286 allows targeted repairs of the optical cover on the Oppo Reno12 5G CPH2625. Its individual part number makes it easier to identify the replacement component and distinguish it from the glass corresponding to the main camera.

Replacing the damaged part helps restore external protection of the auxiliary camera and improves the appearance of the camera area after breakage or impact. It also removes scratches or cracks that may interfere with image capture when the problem originates from the protective glass.

It is a practical solution for workshops performing camera and housing repairs, allowing technicians to preserve internal camera modules that remain functional.

- Turn off the device, disconnect the battery and use ESD protection before starting the repair.

- Carefully remove the damaged glass using appropriate tools to avoid damaging the camera and housing.

- Remove any remaining glass fragments and adhesive from the mounting area before installing the new part.

- Carefully clean the optical surface and check that no dust particles, residue or fragments remain.

- Position the new glass according to its orientation and align it correctly with the secondary camera opening.

- Use suitable fixing adhesive when required, preventing contact with the optical surface.

- Check that the glass is correctly seated and that there are no gaps around its edges.

- Take test photographs to verify image sharpness and the absence of unusual spots or reflections before completing the repair.