Acer Iconia B1-870 spare parts

    There are 3 products.

    Acer Iconia B1-870 Repuestos: Technical Specifications

    The Acer Iconia B1-870 Repuestos denotes the replacement parts for the Acer Iconia B1-870 tablet. Here are the characteristics of the main parts:

    • Display: 8.0" LCD touchscreen, 1280x800 resolution;
    • Processor: Mediatek MT8167B Quad-core;
    • Memory: 1 GB RAM;
    • Storage: 16GB, expandable up to 128G...

    Acer Iconia B1-870 Repuestos: Technical Specifications

    The Acer Iconia B1-870 Repuestos denotes the replacement parts for the Acer Iconia B1-870 tablet. Here are the characteristics of the main parts:

    • Display: 8.0" LCD touchscreen, 1280x800 resolution;
    • Processor: Mediatek MT8167B Quad-core;
    • Memory: 1 GB RAM;
    • Storage: 16GB, expandable up to 128GB via MicroSD;
    • Camera: 2 MP rear camera and 2 MP front-facing camera;
    • Battery: 4600mAh Li-Polymer;
    • Operating System: Android 7.0 (Nougat).

    Replacement Instructions for Acer Iconia B1-870 Repuestos

    Before you start, ensure you have the necessary tools: small Phillips screwdriver, plastic opening tools, tweezers, and a clean work surface.

    Step 1: Power off the device

    Before starting any repairs, make sure to power off the device completely.

    Step 2: Remove the back cover

    With the plastic opening tools, carefully pry off the back cover starting from the corners. Go around the edges and gently separate the cover from the device.

    Step 3: Detach the battery

    Locate the battery connection, and use the plastic opening tools to carefully disconnect the battery from the motherboard.

    Step 4: Remove the battery

    If the battery is glued, carefully wedge the plastic opening tool under the battery and gently lever it up. If it's held in by screws, remove them first.

    Step 5: Access the part you want to replace

    Depends on the part you want to replace. For instance, if it's the camera, disconnect the camera connector from the motherboard and carefully remove it. If it's the screen, you've to remove the remaining screws to lift the screen off.

    Step 6: Replace the part

    Install the new part in the reverse order. For instance, place the new part in its respective place and connect the part to the motherboard.

    Step 7: Reassemble the tablet

    After replacing the part, reassemble the tablet by following the disassembly steps in reverse order. This includes reattaching the battery, closing up the back cover, and turning on the device to confirm the replacement was successful.

    Remember that repairing a device always carries a risk, we recommend going to a professional if you are not confident in your abilities.

    Less
    More
    Showing 1 - 3 of 3 items