Acer Iconia Tab A3-A50 spare parts

Acer Iconia Tab A3-A50 Technical Characteristics

The Acer Iconia Tab A3-A50 is a powerful tablet device with a sleek and user friendly design, ideal for both home and on-the-go use. Here are some of its technical properties:

• Screen: 10.1 inches LED-backlit IPS LCD
• Resolution: 1200 x 1920 pixels
• Operating System: Android 7.0 (Nougat)
• Processor: Quad-core 1.5 GHz Cortex-A53
• Memory: 32GB/64GB internal, expandable up to 256GB via SD card
• Camera: 5MP front camera, 2MP rear camera
• Battery: 6100mAh Non-removable Li-Ion battery

Instructions for Replacing Acer Iconia Tab A3-A50 Repuestos

Follow these step-by-step instructions to properly replace the parts on your Acer Iconia Tab A3-A50:

Preparation

• Ensure the device is fully powered off and disconnected from any power source.
• Gather necessary tools, such as a small Phillips-head screwdriver, plastic opening tools, and the replacement parts.

Opening the Device

• Use plastic opening tools to gently pry open the back casing from the top-end of the tablet.
• Ensure you proceed carefully to avoid breaking any internal components.

Replacing the Component

Depending on the part to be replaced, follow the corresponding instructions:

Replacing the Screen

• Remove any existing adhesive from the device.
• Attach the new screen carefully ensuring it fits perfectly in-place and attach using adhesive.

Replacing the Battery

• Gently disconnect the battery connector from the motherboard.
• Remove the old battery and replace with a new one. Reconnect the battery connector.

Closing the Device

• Ensure all replaced components are secured.
• Gently connect the back casing with the rest of the device. Make sure it snaps into place.

Now the replacement procedure is complete. Power on your device to ensure the replaced component is working correctly.