Amazon Kindle Fire HD 8 2018 spare parts

Amazon Kindle Fire HD 8 2018 Repuestos

The Amazon Kindle Fire HD 8 2018 is a fantastic device with a range of impressive technical characteristics. These elements make up the core functionality of the device and ensure smooth performance.

Technical Characteristics

• Display: 8" HD touchscreen, 1280 x 800 resolution at 189 ppi
• Processor: Quad-Core 1.3 GHz
• Storage: Internal 16 GB or 32 GB, expandable to 400 GB
• Battery Life: Up to 10 hours of reading, browsing the web, watching video, or listening to music
• Charge Time: Approximately 6 hours using the included power adapter
• Connectivity: Dual-band WiFi, USB 2.0 (micro-B connector)
• Camera: VGA Front-facing camera + 2 MP rear-facing HD camera

How to Replace Amazon Kindle Fire HD 8 2018 repuestos

Replacing components (repuestos in Spanish) of your Amazon Kindle Fire HD 8 2018 can be a precise and delicate procedure. Here are detailed instructions.

Preparation

• Turn off your Kindle Fire HD 8 before starting the repair process.
• Gather the necessary tools: a plastic or nylon spudger, a small Phillips-head screwdriver, a guitar pick or a similar small, thin plastic tool, heat gun or a blow dryer.

Removal of the Back Cover

• Apply gentle heat around the edges of the back cover to soften the adhesive underneath.
• Using the guitar pick or thin plastic tool, carefully pry up the edges of the back cover and lift it off the device.

Replacement Procedures

Note: The procedures will vary depending on which part you are replacing. Always remember to handle components with care.

Replacing the Battery

• Remove the screws attaching the battery casing to the device.
• Use the spudger to carefully disconnect the battery connector from the motherboard.
• Remove the old battery and replace it with the new one, making sure to reattach the connector to the motherboard. Secure the battery casing with the screws.

Replacing the Screen

• Remove the screws around the edges of the screen casing.
• Use your spudger to disconnect the screen’s ribbon cables from the motherboard.
• Lift the old screen out of the device, replace it with the new one, and reconnect the cables. Screw the casing back in place.

Reassembling the Device

• Lower the back cover back onto the device making sure it fits accurately before applying gentle pressure to re-adhere it.
• Turn on the Kindle Fire HD 8 to make sure everything works properly.