Blackview Tab 8E spare parts

Blackview Tab 8E Repuestos Technical Characteristics

The Blackview Tab 8E repuestos are parts specifically made for the Blackview Tab 8E tablet. Below are the technical characteristics of these parts:

• Screen: IPS LCD 10.1 inches with Full HD resolution (1920 x 1200 pixels).
• Processor: Octa-Core 1.6GHz, Unisoc SC9863A.
• Memory: Ram 3GB and ROM 32GB extended up to 128GB.
• Battery: Li-Po, non-removable, 6580 mAh.
• Camera: Single rear camera of 13 Megapixels and front camera of 5 Megapixels.

Instructions for replacing Blackview Tab 8E repuestos

Replacing parts of the Blackview Tab 8E can seem complex, but the following instructions will guide you through the process:

Preparation before replacement

• Before starting, make sure you have all the necessary tools. A set of precision screwdrivers, plastic opening tools, tweezers, and a suction cup would be required for this task.
• Make sure you have purchased the correct repuesto for your Blackview Tab 8E.

Step by step instructions

1. Turn off the Blackview Tab 8E before beginning the replacement to avoid short-circuiting any components.
2. Start with unlocking the back cover of your Blackview Tab 8E. Use a plastic opening tool or a similar object to remove the back cover gently. Be careful not to break it.
3. With the back cover removed, you will see several screws. Take your screwdriver and remove all the screws to loosen the internal parts of the tablet.
4. Once the screws are removed, use the plastic opening tools to disconnect the faulty repuesto.
5. After you've removed the faulty part, replace it with the new repuesto.
6. Assembly is the reverse of disassembly. Reconnect the new part, making sure all connections are secure, and all cables are routed correctly and not pinched.

Note: If the replacement seems too complex or you've encountered an unexpected problem, consider seeking the help of a professional.