Huawei Mediapad M5 10.8 spare parts

Huawei Mediapad M5 10.8 Technical Characteristics

The Huawei Mediapad M5 10.8 is a high-end tablet from Huawei that features top-notch technical specifications. Detailed information about these specifications are as follows:

• Display: 10.8 inches, 2560 x 1600 pixels, IPS LCD
• Processor: HiSilicon Kirin 960, Octa-core
• RAM: 4GB
• Storage space: Available in 32GB/64GB/128GB, Expandable via microSD up to 256GB
• Operating System: Android 8.0 (Oreo), upgradable to Android 9.0 (Pie), EMUI 9
• Battery: Non-removable Li-Po 7500 mAh battery

Instructions for Replacing Huawei Mediapad M5 10.8 Parts

Note: Please ensure you have the necessary technical skills and equipment before attempting a device repair. This guide is for informational purposes only. Proceed with caution.

Step 1: Power Off the Device

Before performing any kind of repair, switch off the device first to prevent any possible short circuit.

Step 2: Remove the Back Cover

Begin by removing the back cover of your device. Use a plastic pry tool or a similar object to gently pry open the edges of the back cover.

Step 3: Disconnect the Battery Connector

Once the back cover is open, locate the battery connector and gently disconnect it from the motherboard. Use a plastic pry tool for this purpose.

Step 4: Remove and Replace the Faulty Part

With the battery disconnected, it's safe to proceed with the replacement of the faulty part. Each part such as the screen, battery, charging port, etc. has specific screws and cables attached to it. Remember to re-attach these in the exact order when you are replacing the part.

Step 5: Reassemble the Device

Once you have replaced the faulty part, re-assemble the device by reversing the steps you took to disassemble it. Make sure all cables are connected correctly and all screws are tightly secured.

Finally, turn on the device to check if it is functioning properly with the replaced part.