Ipad 1ª Generation 2010 A1213 Wifi A1337 Wifi, GSM spare parts

Ipad 1ª Generacion 2010 A1213 Wifi A1337 Wifi, GSM Repuestos Specifications

The Ipad 1ª Generacion 2010 A1213 Wifi A1337 Wifi features technical characteristics that solidified it as a revolutionary device during its time.

Device Specifications

• Model: A1213 and A1337
• Release Year: 2010
• Capacity: 16, 32, 64 GB
• Display: 9.7-inch (diagonal) LED-backlit glossy widescreen
• Resolution: 1024 by 768 pixels at 132 pixels per inch (ppi)
• Networks: Wi-Fi (802.11a/b/g/n) and GSM (for A1337 model)

How to Replace Repuestos

The following steps lay out the detailed process for replacing the GSM Repuestos:

Step 1: Power off the iPad

Hold down the 'Sleep/Wake' button until the 'slide to power off' bar appears. Slide the bar to switch off the device.

Step 2: Remove the digitizer

Using a pry tool or a similar object, carefully lift the digitizer from the frame.

Step 3: Remove the LCD

After the digitizer has been removed, you will see the LCD. Remove the four screws at the corners of the LCD with a Phillips-head screwdriver and carefully lift it out of the device.

Step 4: Remove the Repuestos

Locate the Repuestos. Remove any screws holding it in place. Carefully detach any flex cables or connections...

Step 5: Install the new Repuestos

Install the new Repuestos in the previous one's place, making sure to attach any flex cables or connections that were removed from the old part.

Step 6: Reassemble the iPad

Replace the LCD and the digitizer, and then power on the device. The replacement process is finished.

Disclaimer: Please proceed with this replacement at your own risk.