Lenovo TAB 2 A7-10 spare parts

Technical Characteristics of Lenovo TAB 2 A7-10 Repuestos

The Lenovo TAB 2 A7-10 comes with various repuestos (spare parts) that may need replacement over time. They are:

• Screen Display: 7.0 inches IPS LCD, 600 x 1024 pixels resolution
• Battery: Non-removable Li-Ion 3450 mAh battery
• Processor: Mediatek MT8127
• RAM: 1 GB RAM
• Storage: 8/16 GB, expandable via microSD card slot up to 32 GB
• Camera: VGA front-facing camera

Instructions for Replacing Lenovo TAB 2 A7-10 Repuestos

Below are the steps to replace some of the components of the Lenovo TAB 2 A7-10. Please note that your device may need specific tools for this task. Ensure the device is powered off before starting the replacement.

Screen Replacement

• Start by removing the back cover by working around the edges of your tablet.
• Detach the battery connector by lifting its latch and gently pulling it out.
• Unscrew the screws holding the screen in place and keep them safe.
• Gently lift the screen and disconnect the cable connecting it to the motherboard. Replace with the new screen.

Battery Replacement

• Begin by removing the back cover of your device.
• Unscrew the screws to get access to the battery. Keep the screws safe.
• Gently lift up the battery, disconnect the battery connector from the motherboard and replace with the new one. Remember to re-connect the battery to the motherboard.

Camera Replacement

• Open up the device by removing the back cover.
• Detach the connector of the camera module from the motherboard.
• Replace it with the new camera module, then re-attach the connector to the motherboard.

Note: These steps might not cover everything that needs to be done. It is recommended to proceed with professional help if you are unsure.