Lenovo Tab 3 8 Plus TB-8703F spare parts

Technical Characteristics of Lenovo Tab 3 8 Plus TB-8703F Repuestos

The Lenovo Tab 3 8 Plus TB-8703F repuestos include various components that keep your device running optimally. Here, we're going to focus on the primary parts such as Display, Battery, and Camera.

• Display: The Lenovo Tab 3 8 Plus TB-8703F comes with an 8.0 inches IPS display that has a resolution of 1200 x 1920 pixels.
• Battery: This model is equipped with a non-removable Li-Ion 4250mAh battery.
• Camera: The device has an 8MP Rear Camera and 5MP front camera for selfies.

Instructions to Replace Lenovo Tab 3 8 Plus TB-8703F Repuestos

How to Replace the Display

Replacing the display on a Lenovo Tab 3 8 Plus TB-8703F consists of several careful steps:

• Switch off your Tab and use a heat gun or a hairdryer to heat the edges of the screen to soften the adhesive.
• Use a plastic opening tool to pry off the old display.
• Once the display is detached, disconnect any cables attached to it and keep it aside.
• Attach the new display to the tablet, making sure to connect any cables that you detached from the old display.
• Finally, secure the new display by pressing down along the edges to stick it to the adhesive.

How to Replace the Battery

To replace the battery, follow these steps:

• Firstly, turn off your device.
• Open up the device by loosening the screws at the back with a suitable screwdriver.
• One you have access to the battery, carefuly disconnect its connector from the motherboard.
• Remove the old battery and replace it with the new one.
• Reconnect the battery connector and close your device by fastening the screws at the back.

How to Replace the Camera

Follow these steps if you wish to replace the camera:

• Begin by switching off your Lenovo Tab 3.
• Use a screwdriver to loosen the screws at the back of the device and remove the back panel.
• Disconnect the existing camera module from the motherboard.
• Replace it with the new camera module, connecting it securely to the motherboard.
• Reassemble your device by tightening the screws and switching it on.