Lenovo Yoga Tab 4 Plus XT-X704F spare parts

    There are 13 products.

    Technical Characteristics of Lenovo Yoga Tab 4 Plus XT-X704F Repuestos

    The Lenovo Yoga Tab 4 Plus XT-X704F is a high-quality tablet of impressive specifications. The following are its major technical parts:

    • Display: 10.1" FHD and resolution of 1280 x 800 pixels
    • Processor: Qualcomm Snapdragon 625, Octa-Core, 2.0 GHz
    • Storage: 16/32/...

    Technical Characteristics of Lenovo Yoga Tab 4 Plus XT-X704F Repuestos

    The Lenovo Yoga Tab 4 Plus XT-X704F is a high-quality tablet of impressive specifications. The following are its major technical parts:

    • Display: 10.1" FHD and resolution of 1280 x 800 pixels
    • Processor: Qualcomm Snapdragon 625, Octa-Core, 2.0 GHz
    • Storage: 16/32/64GB expandable by MicroSD up to 128GB
    • RAM: 3/4GB
    • Battery: 7000 mAh Li-Ion
    • Operating System: Android 6.0 Marshmallow
    • Cameras: Rear camera of 8 MP, Front camera of 5 MP
    • Connections: Wi-Fi, 4G and Bluetooth 4.2

    Instructions to Replace Lenovo Yoga Tab 4 Plus XT-X704F Repuestos

    Please be aware that replacing parts on your device involves risk. Make sure to back up all important data, power off the device, and work in a static-free environment.

    Tools Needed

    • Small Phillips Screwdriver
    • Spudger or Plastic Opening Tools
    • Precision Tweezers

    Replacement Steps

    Follow the steps below to complete the replacement process:

    1. Power off your Lenovo Yoga Tab 4 Plus XT-X704F. Remove any external accessories and cables.
    2. Ensure your work surface is clean and dust-free to avoid any damage.
    3. Remove the back cover using the plastic opening tools. Begin from the small notch at the bottom right side of the back cover, carefully prying it up and away from the device, moving around the edges.
    4. Locate the part that needs replacement, it could be the battery, display or any other component.
    5. Use the precision tweezers to disconnect any cables attached to the part if necessary.
    6. Remove any screws holding the part in place using the Phillips screwdriver.
    7. Carefully remove the old part, and replace it with the new one. Reattach any cables and replace the screws.
    8. Press the back cover back into place starting at the top and working your way around the edges until it clicks into place.
    9. Power on the device to verify the new component is working as expected.

    Always remember to dispose the replaced parts responsibly. If you face complications, consult with a certified professional.

    Less
    More
    Showing 1 - 13 of 13 items